RAID Konfiguration FAI

Julian Decker julian.decker at gmx.com
Thu Nov 3 10:35:14 CET 2011


Hi and thanks to all,

 unfortunately the "-e 1.0" option did not solve the problem.

 I now tried the following config:

 ---------------------------------------------------------------------------------
 disk_config sda
 primary - 10000 - -
 primary - 10000 - -

 disk_config sdb
 primary - 10000 - -
 primary - 10000 - -

 disk_config raid
 raid1 / sda1,sdb1 ext3 rw mdcreateopts="-e 1.0"
 raid1 swap sda2,sdb2 swap sw mdcreateopts="-e 1.0"
 ---------------------------------------------------------------------------------

 mdadm is now called whith the -e option:

 ...
 Executing: yes | mdadm --create -e 1.0 /dev/md0 --level=raid1 --force --run --id-devices=2 /dev/sda1 /dev/sdb1
 [ 54.028489] raid1: md0 is not clean -- starting background reconstruction
 Executing: mdfs.ext3 /dev/md0
 Executing: yes | mdadm --create -e 1.0 /dev/md1 --level=raid1 --force --run --id-devices=2 /dev/sda2 /dev/sdb2
 [ 54.028489] raid1: md1 is not clean -- starting background reconstruction
 Executing: mkswap /dev/md1
 Executing: fai-vol_id -u /dev/md1
 Executing: fai-vol_id -u /dev/md1
 Executing: fai-vol_id -u /dev/md0
 Executing: fai-vol_id -u /dev/md0
 ...

 Creation of raid devices does work, after FAI installation I was able to mount them, fstab looks good too.

 I use Debian 6.0.3 and Grub2 1.98 at the moment.


 regards


----- Original Message -----
From: Michael Tautschnig
Sent: 10/31/11 08:09 PM
To: linux-fai at uni-koeln.de
Subject: Re: RAID Konfiguration FAI

 Hi all, I hope sticking with English is ok with everyone. Otherwise please just drop a brief note here. > On 10/28/2011 12:46 PM, Julian Decker wrote: > > Hallo, > > > > ich versuche mich derzeit an der Konfiguration eines softRAIDs und > > habe damit leider Schwierigkeiten. > > Zunächst habe ich offensichtlich den Fehler gemacht, die boot > > Partition (Kernel) in das RAID zu legen, was anscheinend nicht möglich > > ist, da der Kernel (und in Folge mdadm) zuerst geladen werden muss um > > überhaupt das softRAID ansprechen zu können - das leuchtet mir ja > > soweit ein. > > Ich habe nun die boot Partition außerhalb des RAIDs angelegt und nun > > kann das System zwar den MBR finden und den Bootloader (Grub) laden, > > allerdings findet dieser die root Partition nicht. > > Braucht Grub für die Verwendung des RAIDs eine spezielle Konfiguration? > > Which version of Grub is that (and which Debian release is it)? [...] > > The problem is superblock version 1.2 > > having s!
 uperbloc v1.0 solves the problem with grub and raid1 > > I have added metadata=1.0 to the mdadm.conf in the nfsroot > and that solved the problem with bootable raid1 > > cat /srv/fai/nfsroot/live/filesystem.dir/etc/mdadm/mdadm.conf | grep > metadata > CREATE owner=root group=disk mode=0660 auto=yes metadata=1.0 > This thus seems to be a recurrence (which new metadata versions) of http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=570117 Note that fiddling with mdadm.conf shouldn't be necessary - just use mdcreatopts="-e 1.0" in the raid1 ... line of the disk_config file. Best, Michael
-------------- n�chster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: <http://lists.uni-koeln.de/pipermail/linux-fai/attachments/20111103/3e4de4dd/attachment.html>


More information about the linux-fai mailing list