pvcreate fails on md raid

[Martin Konrad]

Hi,
it seems the bug reported by Darshaka Pathirana (third issue in 
http://www.mail-archive.com/linux-fai@uni-koeln.de/msg03513.html) has not been 
fixed in 3.4.5. My system fails with the same error. Here the last lines from 
fai.log:

[...]
Executing: pvcreate /dev/md1
Command had non-zero exit code
Error in task partition. Traceback: task_error task_partition task 
task_install task task_action task main
FATAL ERROR. Installation stopped.

After executing "pvremove -ff -y /dev/md1" everything works fine.

Regards

Martin

-- 
Dipl. Phys. Martin Konrad
Technische Universität Darmstadt
Institut für Kernphysik
Schlossgartenstr. 9
64289 Darmstadt
Tel: +49-6151-16-5121
Fax: +49-6151-16-4321
-------------- next part --------------
disk_config disk1 disklabel:msdos bootable:1
primary  -             500        -      -
primary  -             0-2G       -      -

disk_config disk2 disklabel:msdos bootable:1
primary  -             500        -      -
primary  -             0-2G       -      -

disk_config disk3 disklabel:msdos bootable:1
primary  -             500        -      -
primary  -             0-2G         -      -

disk_config raid
raid1    /boot         disk1.1,disk2.1,disk3.1  ext2  rw,errors=remount-ro
raid5    -             disk1.2,disk2.2,disk3.2  -  -

disk_config lvm
vg         main        md1
main-root  /           3G-        ext3    rw,errors=remount-ro
main-var   /var        500M       ext3    rw,errors=remount-ro
main-home  /home       100M       ext3    rw,errors=remount-ro
main-tmp   /tmp        100M       ext3    rw
main-swap  swap        100M       swap    rw