fai-setup // Disk Partionierung funktioniert nicht
Stefan Reinhardt
sreinhardt at ATM42.mobile.de
Wed Sep 4 17:34:47 CEST 2002
Hi @ll,
hat mal einer zwei Tips für mich?!
erstmal gibt es bei einem Aufruf von fai-setup immer die unten
angegebene Ausgabe die leider nicht konform mit meiner Anleitung geht :(
.... warum habe ich dependecy Probleme?
.... und warum bleibt das Script nach vielen Leerzeilen stehen ohne ein
OK etc.?
Und zweites Problem, wenn ich einfach annehme alles hat geklappt
(*immerpositivdenken*) und einen Client installieren will, werden die
Scripte etc. im Verzeichnis class zwar ausgeführt, aber eine
Festplattenpartitionierung (nächstes Verzeichnis) nimmt er leider nicht
vor ... genauer gesagt kann ich überhaupt nichts bemerken was er noch
tun könnte, er sollte doch nun einfach loslegen (Partitionsdatei habe
ich angepasst) oder muss ich noch irgendwo nen Knöpfchen drücken, bzw.
hab ich etwas vergessen?
gruss
stefan
P.S.
Die Ausgaben:
Ausgabe fai-setup: ->
Account $LOGUSER=fai already exists.
Make sure, that all install clients can
log into this account without a password.
/home/fai/.ssh/authorized_keys created.
User account fai set up.
Creating FAI nfsroot can take a long time and will
need more than 150MB disk space in /usr/lib/fai/nfsroot.
/usr/lib/fai/nfsroot already exists. Removing /usr/lib/fai/nfsroot
dpkg: base-passwd: dependency problems, but configuring anyway as you
request:
base-passwd depends on libc6 (>= 2.2.4-4); however:
Package libc6 is not installed.
dpkg: base-files: dependency problems, but configuring anyway as you
request:
base-files depends on awk; however:
Package awk is not installed.
dpkg: regarding .../archives/dpkg_1.9.21_i386.deb containing dpkg,
pre-dependency problem:
dpkg pre-depends on libc6 (>= 2.2.4-4)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../archives/dpkg_1.9.21_i386.deb containing dpkg,
pre-dependency problem:
dpkg pre-depends on libncurses5 (>= 5.2.20020112a-1)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../archives/dpkg_1.9.21_i386.deb containing dpkg,
pre-dependency problem:
dpkg pre-depends on libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810)
dpkg: warning - ignoring pre-dependency problem !
dpkg: dpkg: dependency problems, but configuring anyway as you request:
dpkg depends on libc6 (>= 2.2.4-4); however:
Package libc6 is not installed.
dpkg depends on libncurses5 (>= 5.2.20020112a-1); however:
Package libncurses5 is not installed.
dpkg depends on libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810); however:
Package libstdc++2.10-glibc2.2 is not installed.
Package `sysvinit' is not installed and no info is available.
Use dpkg --info (= dpkg-deb --info) to examine archive files,
and dpkg --contents (= dpkg-deb --contents) to list their contents.
dpkg: debconf: dependency problems, but configuring anyway as you
request:
debconf depends on fileutils (>= 4.0-5); however:
Package fileutils is not installed.
dpkg: regarding .../bash_2.05a-11_i386.deb containing bash,
pre-dependency problem:
bash pre-depends on libncurses5 (>= 5.2.20020112a-1)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../archives/dpkg_1.9.21_i386.deb containing dpkg,
pre-dependency problem:
dpkg pre-depends on libncurses5 (>= 5.2.20020112a-1)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../archives/dpkg_1.9.21_i386.deb containing dpkg,
pre-dependency problem:
dpkg pre-depends on libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810)
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../login_20000902-12_i386.deb containing login,
pre-dependency problem:
login pre-depends on libpam0g (>= 0.72-1)
libpam0g is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../ncurses-bin_5.2.20020112a-7_i386.deb containing
ncurses-bin, pre-dependency problem:
ncurses-bin pre-depends on libncurses5 (>= 5.2.20020112a-1)
libncurses5 is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../shellutils_2.0.11-11_i386.deb containing shellutils,
pre-dependency problem:
shellutils pre-depends on login | hurd
login is unpacked, but has never been configured.
hurd is not installed.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../util-linux_2.11n-4_i386.deb containing util-linux,
pre-dependency problem:
util-linux pre-depends on libncurses5 (>= 5.2.20020112a-1)
libncurses5 is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
dpkg: regarding .../util-linux_2.11n-4_i386.deb containing util-linux,
pre-dependency problem:
util-linux pre-depends on slang1 (>> 1.3.0-0)
slang1 is unpacked, but has never been configured.
dpkg: warning - ignoring pre-dependency problem !
init: timeout opening/writing control channel /dev/initctl
init: timeout opening/writing control channel /dev/initctl
Looking for keymap to install:
NONE
Looking for keymap to install:
NONE
/tmp/fai/rcS.log -->
-----------------------------------------------------
FAI 2.3.4, 16 May 2002
Fully Automatic Installation for Debian GNU/Linux
Copyright (c) 1999-2002, Thomas Lange
lange at informatik.uni-koeln.de
-----------------------------------------------------
Calling task_confdir
Kernel parameters:ip=dhcp BOOT_IMAGE=installkernel
Defining variable: ip=dhcp
Defining variable: BOOT_IMAGE=installkernel
/fai mounted from FAI:/usr/local/share/fai
Calling task_setup
FAI_FLAGS: verbose=1
FAI_FLAGS: createvt=1
FAI_FLAGS: sshd=1
Press ctrl-c to interrupt FAI and to get a shell
Calling task_defclass
Defining classes
ls: S[0-9]*.source: No such file or directory
Executing S01alias.sh
Executing S07disk.pl
Executing S24nis.sh
Executing S90partitions.pl
Calling task_defvar
Executing DEFAULT.var
Calling task_action
FAI_ACTION: sysinfo
Showing system information.
Calling task_sysinfo
The defined classes are:
DEFAULT I386 LINUX NONIS what LAST
The classes are also saved in /tmp/fai/FAI_CLASSES
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev
03)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev
03)
00:0a.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev
05)
00:14.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
00:14.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01)
00:14.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01)
00:14.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP
1X/2X (rev 5c)
Device DMA IRQ I/O Ports
------------------------------------------------
ATI 1000-10ff
cascade 4 2
dma 0080-008f
dma1 0000-001f
dma2 00c0-00df
eepro100 2000-201f
eth0 11
fpu 00f0-00ff
ide0 14 01f0-01f7 03f6-03f6 2040-2047
ide1 15 0170-0177 0376-0376 2048-204f
Intel 2000-201f 2020-203f 2040-204f f800-f83f
fc00-fc1f
keyboard 1 0060-006f
PCI 0cf8-0cff 1000-1fff
pic1 0020-003f
pic2 00a0-00bf
rtc 8 0070-007f
serial 02f8-02ff 03f8-03ff
timer 0 0040-005f
vga+ 03c0-03df
Ethernet cards found: eth0 eth0
Ethernet cards running: eth0
eth0 Link encap:Ethernet HWaddr 00:50:C3:90:8B:87
inet addr:192.168.100.106 Bcast:192.168.100.255
Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4891 errors:0 dropped:0 overruns:0 frame:2
TX packets:2026 errors:0 dropped:0 overruns:0 carrier:0
collisions:20 txqueuelen:100
RX bytes:6263864 (5.9 MiB) TX bytes:303327 (296.2 KiB)
Interrupt:11 Base address:0xd000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1092 (1.0 KiB) TX bytes:1092 (1.0 KiB)
xserver for graphic card: ati
Intel Corporation 82557 [Ethernet Pro 100]
Unknown CD-224E
Linux IDE-SCSI emulation layer
ATI Technologies, Inc. 3D Rage Pro AGP [264GT Pro GB]
eepro100
ide-scsi
Can't open file `/proc/parport/0/autoprobe' for reading!
detect 0.9.72 (c)2000 MandrakeSoft
Detection in progress, please wait ...
#
# This report has been generated by detect 0.9.72
#
CPU:GenuineIntel:Pentium III
(Katmai):497:[HAS_FPU:HAS_MMX]:992.87:(none)
MEMORY:125592:109184:0:8:8328:0:0
BRIDGE:PCI:Intel Corporation:440BX/ZX - 82443BX/ZX Host bridge:ignore
BRIDGE:PCI:Intel Corporation:440BX/ZX - 82443BX/ZX AGP bridge:ignore
BRIDGE:PCI:Intel Corporation:82371AB PIIX4 ISA:unknown
IDE:PCI:Intel Corporation:82371AB PIIX4 IDE:unknown
USB:PCI:Intel Corporation:82371AB PIIX4 USB:usb-uhci
DISK:ATAPI/IDE:Unknown:WDC WD100AA:/dev/hda:19535040:240:63:1292
FLOPPY:Floppy Drive Controller:Unknown:1.44MB 3.5":/dev/fd0
CDROM:ATAPI/IDE:Unknown:CD-224E:/dev/hdc
VIDEO:PCI:ATI Technologies Inc:Mach64 3D Rage Pro AGP
1X/2X:[Card:ATI]:256:(null):(null)
ETHERNET:PCI:Intel Corporation:82557 [Ethernet Pro 100]:eepro100
MOUSE:PS/2:Unknown:Unknown:/dev/psaux
PARALLEL:/dev/lp0:LPT0
SERIAL:/dev/ttyS0:COM0
SERIAL:/dev/ttyS1:COM1
OTHER:80867113:PCI:Intel Corporation:82371AB PIIX4 ACPI:ignore
FREE_IRQS:3:4:5:7:10:12:13:
FREE_DMAS:0:1:3:5:6:7:Attached devices: none
major minor #blocks name
3 0 9770544 hda
/dev/hda:
multcount = 16 (on)
I/O support = 0 (default 16-bit)
unmaskirq = 0 (off)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 1292/240/63, sectors = 19541088, start = 0
Model=WDC WD100AA, FwRev=05.05B05, SerialNo=WD-WMA1C1506827
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs
FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=40
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=19541088
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4
AdvancedPM=no WriteCache=enabled
Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 ATA-4
busstate = 1 (on)
9770544
/dev/hda1: empty
/dev/hda2: empty
/dev/hda3: empty
/dev/hda4: empty
/dev/hda5: empty
/dev/hda6: empty
/dev/hda7: empty
/dev/hda8: empty
/dev/hda9: empty
Disk /dev/hda: 240 heads, 63 sectors, 1292 cylinders
Units = sectors of 1 * 512 bytes
Device Boot Start End Blocks Id System
No /etc/fstab found
Loading /usr/share/keymaps/i386/qwertz/de-latin1.kmap.gz
Saving log files remote to fai@ what/sysinfo-20020904_124015
ssh: mkdir -p what/sysinfo-20020904_124015; cd what; rm -f
last-sysinfo; ln -sf sysinfo-20020904_12: Name or service not known
ssh: : Name or service not known
lost connection
Press <RETURN> to reboot or ctrl-c to execute a shell
More information about the linux-fai
mailing list