mount to nfs failed

[akr lot]

Hi;
To compare to a clean log:
Reading /tmp/fai/boot.log
FAI_FLAGS: verbose sshd createvt
FAI_CONFIG_SRC is set to nfs://kueppers/srv/fai/config
Failed log:
Reading /tmp/fai/boot.log
FAI_FLAGS: verbose sshd createvt
mount to nfs 10.10.10.10 failed

So here i think as you mentioned i need to correct the value of 
FAI_CONFIG_SRC . In which file could i do that (/etc/fai/fai.conf????)? and do i need to rerun make-fai-nfsroot
thanks


> Date: Thu, 17 Dec 2009 16:21:50 +0100
> Subject: Re: mount to nfs failed
> From: blacky+fai at fluffbunny.de
> To: mgoetze at mgoetze.net
> CC: akrlot at msn.com; linux-fai at uni-koeln.de
> 
> >> i have changed fai ip address. then i changed
> >> /srv/tftp/pxelinux.cfg/default with the new address
> >> but i am getting an error message: mount to nfs 10.10.10.10 failed.
> >> 10.10.10.10 is the old ip address.
> >> I think i need to change the ip adress somewhere else?
> 
> > fix /etc/fai/* and rerun make-fai-nfsroot.
> 
> That's not necessary.
> 
> @akr:
> 
> 1) Do you use the option "root-path" in your dhcpd config? I read
> somewhere about it, but never got it to work.
> 
> 2) Do you specify full paths for "nfsroot" and "FAI_CONFIG_SRC" in the
> tftp boot descriptions or just "nfsroot=/srv/nfsroot" (just an example).
> 
> If you don't then the value from "next-server" (dhcpd.conf) is used as the
> nfs-server.
> 
> example for "full path":
> nfsroot=a.b.c.d:/srv/fai/nfsroot
> FAI_CONFIG_SRC=nfs://a.b.c.d/srv/fai/config/
> 
> 
> did this help?
> 
> tschüß
> thomas
> 
 		 	   		  
_________________________________________________________________
Windows Live: Make it easier for your friends to see what you’re up to on Facebook.
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_2:092009
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.uni-koeln.de/pipermail/linux-fai/attachments/20091219/9f0ca16b/attachment.htm